|
|
| Unlike a lot of full sized notebooks there is no port on the bottom of the P-2000
for the memory to quickly slip into. Installing additional memory on
this little notebook it is a little more time consuming, but not overly complex.
The red arrow points to the one screw you will be removing, but
first the battery should be taken out. |
|
|
| There are two small slides which get pushed
towards the center of the notebook in order to release the battery. |
|
|
| Pull the battery out and put it aside until you
are finished with the installation. |
|
|
| The memory socket is on the other side of the
notebook, under the keyboard but before the keyboard will come loose one
small screws needs to be removed. |
|
|
| Any small phillips screw driver can be used to
remove the screw, just don't lose it. When the memory installed you will
need to put the screw back into hold the keyboard firmly in
place. |
